014-1066-050 - Follower plate for industrial pumps with shank 50 mm subgroup-Industriële pneumatische oliepompen Handbediende vetpomp geschikt voor 18

Handbediende vetpomp geschikt voor 18 - 30 kg emmers

These pumps are advised for the transfer of high viscosity oil (SAE 15/280)

Those are suitable for the supply at high pressure of all kinds of grease at short and long distance

Suitable for the dispensing of low and high viscosity oils (SAE 15-220)

014-1066-050 - Follower plate for industrial pumps with shank 50 mm subgroup-Industriële pneumatische oliepompen Handbediende vetpomp geschikt voor 18It is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.